Tips & Tricks

Before the Printing Starts

1) To avoid the unnecessary filament impeding the actual printing, remove the filament using the Tweezer when the 3D Printing Module is moving from the work origin to the starting point.

2) For better print results, rotate the side with overhangs to the left so that the fan can help cool the filament off.

When Printing

1) Check the 3D printing process every 15 minutes or so to avoid failures.

After the Printing Finishes

1) To avoid the filament intertwining, insert the end into the hold of spool.

results matching ""

    No results matching ""